Welcome To EagleDigitizing

« Embroidery digitizing tools and featureHome based Embroidery digitizing »

Embroidery digitizing tools and feature

If you want to buy an embroidery digitizing machine you have to follow some criteria to select proper machine. Without proper configuration you cannot get the result from your machine. So it is important for you to know the criteria to select a proper machine. Basically depending on these criteria overall machine and output quality fixed the design and its pattern. In case hoop-size for mid-level machine you have to choose 14*20 cm frame. For high end sewing jumbo hoops size is 40*26 cm frame. And another important hoop is tiny hoops. Tiny hoops helps to embroidering in the tight places in fabric. Stitches quality is also important for embroidering. Stitches per minute should be at least 500. For a typical range of output it should be from 400 to 1000 per minute. Elna stitches machine can give output up to 750 per minute. For high class graphics designing and output your machine and software should include built in font, pattern, and design elements. Needle threader is also important in the criteria list. It helps to putting the thread in to the needle. A good needle threader reduces the thread breakage. Thread cutter is also used for embroidering. It should be in high quality. If your machine supports USB, cable and CD driver connection to the pc than you can easily transfer the design in to the digitizer machine.
User friendly software can give you some unique quality, command, and functionalities. You can use this digitizer machine easily by some simple command. You have to buy designing software for the large amount business. But for simple business you can use free designing software. For designing we recommend to use adobe illustrator to make vector design. After fulfill those criteria you need to select the fabric materials, positioning, and sliding control. If you can fulfill all of those criteria than you are ready to produce digitize embroidery. All of those hardware tools and software you can buy from the any local software supplier. Or you can by this digitizer machine by ordering via online. You will get lots of updated information if you want you can buy the update version as well. But we recommend in initial stage for trial use free software. If, you are satisfy with free software. After that you can use pro version software. Different kinds of machine are available in the market. Some machine is only work for sewing, some of them working with an embroidery module. There are two types of digitizer one is Single needle embroidery digitizer machine and another is multi needle embroidery machine.
If you choose mid-level machine, you will have to face some problems like repeatedly thread changing. And you will see the all the times precision will not be the same. Narrow stitching area, simple interface etc. you will have to face this kind of problem. But, if you choose high level machine your time and cost both will be saved. And it will increase your business. You will get lots of models in the market. Before buy the product consult to an expert digitizer than you will be benefited.

Post comment:

◎welcome to give out your point。




Powered By Z-Blog 1.8 Walle Build 100427

Copyright 2009-2010 eagledigitizing.com. All Rights Reserved.